|
Envirosol Equipment Listing |
|||
|
GAA P/N |
Description |
Image |
|
|
Deodourgas Brass Nut/Nipple 5/8" BSP - Material : Brass Unplated LH Thread. Suits Deodourgas & Bactigas Cylinder |
|
|
|
|
Insectigas Gun Kit Includes Gun, 2m Hose, Nut & Spigot Nozzle [3 g/s] |
|
|
|
|
SPIGOT Deodourgas 1/4" Material : Brass Type 20 |
|
p1 |
|
|
SPIGOT Deodourgas 1/8" Material : Brass Type 20 |
|||
|
Spigot Pestigas/Insectigas 1/4" Material : Brass Includes RB38 Filter & RB39 Retaining Nut Type 40 & 42 40 & 42 |
|
||
|
Spigot Pestigas/Insectigas 1/8" Material : Brass Includes RB38 Filter & RB39 Retaining Nut Type 40 & 42 |
|||
|
Brass Nut Pestigas Material : Brass Left Hand Thread, Type 42 |
|
||
|
Brass Nut Insectigas Material : Brass Left Hand Thread, Type 40 |
|||
|
Envirosol Hose 2m X 5/32" ID Material : Stainless Steel Braided Teflon Ends : " BSPP Female Swivel |
|
||
|
Cylinder Securing Strap Material : Steel Plated Ends, Single Ply Polyester Flat Webbing, Self Locking Quick Release Buckle |
|
||
|
Brass Male Connector 1/4" BSPP x 1/4" BSPT Material : Brass |
|
||
|
Nozzle Crack & Crevice Material : Brass Body, Stainless Steel Tube Nominal Flow Rate : 16.5g/s |
|
||
|
Crack & Crevice Insert [Pack of 5] Material : Stainless Steel 0.9mm Wire Reduces Gas Flow Rate of Nozzle #730013 to 6g/s |
|
||
|
Brass Male Connector 1/4" BSPP x 1/8" BSPT Material : Brass |
|
||
|
Solenoid Valve 240V x 3/64 Orifice Material : Nickle Plated Brass Body Ports : " BSPT Female (SCXD264D9 12- Protection Rating : IP65 Weatherproof Housing Power Rating : 240VAC 50Hz |
|
||
|
Nozzle 1/8" NPT Material : Stainless Steel Nominal Flow Rate : 6 g/s |
|
|
|
|
Tubefit Nozzle Adapter Material : Brass Connects Nozzle #730025 to 1/4” Aluminium Tube |
|
||
|
Nozzle Fixed System Material : Unplated Brass Includes : #736724 Valve Nozzle Core Nominal Flow Rate : 9 g/s |
|
||
|
Nozzle Block [4- Material : Unplated Brass Used To Mount 4 Nozzles #730025 c/w 2off x Screws M4 x 10Lg |
|
||
|
Solenoid Valve Overhaul Kit Material : Stainless Steel & Teflon Wetted Parts, Steel Plated Socket Use : To Upgrade and Repair Solenoid Valve #730016 Includes : Core Tube, Spring, & Assembly, Body Gasket, Socket Spanner, Retaining Clip |
|
||
|
Solenoid Bracket 1/8" To Suit : Solenoid #730016 Material : Anodised Aluminium |
|
||
|
1/4" Aluminium Tube 30m Lg Annealed Aluminium 1/4" OD x 1.2mm Wall Suitable For Envirosol Gases, & Low Pressure ECO2Fume Gas. Not Suitable For ECO2Fume Liquid. Weight 1.4kg/30m Roll, Burst Pressure of 30 mPa |
|
||
|
Capillary Timer Box 240VAC |
|
|
|
|
1/4" Aluminium Tube 100m Lg [4.6kg] Annealed Aluminium 1/4" OD x 1.2mm Wall Suitable For Envirosol Gases, & Low Pressure ECO2Fume Gas. Not Suitable For ECO2Fume Liquid. Weight 4.6kg/100m Roll, Burst Pressure of 30 mPa |
|
|
|
|
Dose Fill Connector Pestigas Material : Brass Use : Refilling Envirosol Dose Gun with Pestigas |
|
||
|
Dose Fill Connector Insectigas Material : Brass Use : Refilling Envirosol Dose Gun with Insectigas |
|||
|
Dose Fill Connector Deodourgas Material : Brass Use : Refilling Envirosol Dose Gun with Deodourgas |
|
||
|
Bactigas Auto Hand Gun Kit Includes Gun, 2m Hose, Nut & Spigot Also suitable for Deodourgas & Ripegas |
|
|
|
|
Brass Hex Manifold Block 6 Point Material : Brass Use : Connecting 6 Envirosol Hoses, Includes : Hex Block c/w 2off x Mounting Screws Note : Filter #736460 Can Be Fitted Into This Housing |
|
|
|
|
90 Micron S'Steel Filter Element Material : Sintered Stainless Steel Use : With Manifold #736459 or Filter Housing #736698 Includes : Filter Element Only |
|
||
|
Filter Element Retaining Spring Material : Stainless Steel %%c1/2" x 3/4" Lg x 0.042" Wire Use : Secures Sintered Filter #736460 in Manifold #736459 Includes : Spring Only |
|
||
|
Envirosol Hose 1/4"OD X 610mm Lg Material : Stainless Steel Braided Teflon Ends : 1/4" BSPP Female Swivel Both Ends |
|
|
|
|
Gun Nozzle Seal Material : Nylon, 10 ID, 15 OD, 1.2 Thick Use : Nozzle To Envirosol Gun Sealing Washer Includes : Spring Only |
|
||
|
Seal For Envirosol Gun Material : EPDM Rubber Use : Replacement Seals For Envirosol Gun #736679 Includes : Two "O" Rings Only |
|
||
|
Retaining Cap Steel Nickle Plated Material : Nickle Plated Brass Use : Replacement Cap For Envirosol Gun #736679 Includes : Cap Only |
|
||
|
Pestigas Gun Kit Includes Gun, 2m Hose, Nut & Spigot Nozzle #736685 [3 g/s] |
|
|
|
|
Deodourgas/Bactigas Gun Kit Includes Gun #736679, 2m Hose #730006, Nut & Spigot #736675 Nozzle #736686 [17 g/s] |
|
|
|
|
Space Control Module MK4 |
|
|
|
|
Manual Space Control Module |
|
|
|
|
Restrictor 1.0mm Material : Non Plated Brass Use : Is Swaged on to (via a Swagelok Fitting) the end of " Aluminium Tube to Restrict the flow of liquid into a Dose Cylinder #737362. Should be Inserted into the Supply Port Fitting of the 3- Includes : Restrictor Only |
|
p5 |
|
|
Deodourgas/Bactigas Nut & Spigot Material : Non Plated Brass Use : Connects Hose#730006 or #736588 to a Deodourgas Cylinder |
|
||
|
Pestigas Nut & Spigot Material : Non Plated Brass Use : Connects Hose#730006 or #736588 to a Pestigas Cylinder |
|
||
|
Insectigas Nut & Spigot Material : Non Plated Brass Use : Connects Hose#730006 or #736588 to a Insectigas Cylinder |
|
|
|
|
Envirosol Gun Recondition Kit Material : Stainless Steel & Brass Use : To Upgrade and Repair Envirosol Gun #736679 Includes : Front Seal #737125, Spindle Spring #737215, Stem #737214, |
|
||
|
Envirosol Hand Gun Material : Brass Housing, Plastic Casing Use : Insectigas, Pestigas, Deodourgas, Bactigas Dispensing Includes : GunJet30, Seal Kit #736630, Nozzle Cap #736633 Nozzle Seal #736620 |
|
||
|
Solitaire Timer (MultiTimer) This kit is supplied with a digital weekly timer #737238 & a recycle timer. The unit is designed to pulse two solenoid valves & is programmable from 0.1s to 300h. It is supplied with 4 rear mounting holes, 2m Power lead & 2 solenoid plugtops. |
|
|
|
|
Solitaire Pestigas Dual Solenoid Kit Is supplied with a Multitimer #736680, two Solenoid Valves #730016, 2m Hose #730006, Nozzle #730020, Strap # 730008 & Fittings |
|
|
|
|
Solitaire Deodourgas Dual Solenoid Kit Is supplied with a Multitimer #736680, two Solenoid Valves #730016, 2m Hose #730006, Nozzle #730020, Strap # 730008 & Fittings. Also suitable for Bactigas & Ripegas |
|
|
|
|
Nozzle Insectigas/Pestigas (3 g/s) Material : Stainless Steel Use : On Envirosol Hand Gun #736679 for Insectigas & Pestigas Nominal Flow Rate : 3.0 g/s |
|
p6 |
|
|
Nozzle Deodourgas [17 g/s] Material : Stainless Steel Use : On Envirosol Hand Gun #736679 for Deodourgas & Bactigas Nominal Flow Rate : 17.0 g/s |
|||
|
Dose Gun Quick Release Coupling (EPR) Material : Brass Housing, EPR "O" Rings Use : To Charge Envirosol Dose Cylinder |
|
||
|
Dose Cylinder Adaptor C Material : Unplated Brass Use : Allows 1/4" Fitting to Be Connected to C Size Dose Cylinder |
|
||
|
Dose Cylinder Adaptor D, E & G Material : Unplated Brass Use : Allows 1/4" Fitting to Be Connected to D, E & G Size Dose Cylinder |
|
p7 |
|
|
Dose Cylinder Mounting Bracket C Material : White Powder Coated Steel Use : To Support "C" Size Envirosol Dose Cylinder A = 180, B = 250, C = 150, D = 117, E = 25 |
|
||
|
Dose Cylinder Mounting Bracket D Material : Cold Gal Zinc Painted Steel Use : To Support "D" Size Envirosol Dose Cylinder A = 271, B = 299, C = 263, D = 175, E = 32 |
|
||
|
Dose Cylinder Mounting Bracket E & F Material : Cold Gal Zinc Painted Steel Use : To Support "E" & “F” Size Envirosol Dose Cylinders A = 310, B = 390, C = 354, D = 215, E = 32 |
|||
|
Dose Cylinder Mounting Bracket G Material : Cold Gal Zinc Painted Steel Use : To Support "G" Size Envirosol Dose Cylinder A = 345, B = 410, C = 374, D = 250, E = 32 |
|||
|
Brass Union Tee 1/4" Material : Unplated Brass Use : To Connect 1/4" OD Aluminium Tube Includes : Body, 3off Nuts, 3off Ferrule Sets |
|
||
|
Brass Union 1/4" Material : Unplated Brass Use : To Connect 1/4" OD Aluminium Tube Includes : Body, 2off Nuts, 2off Ferrule Sets |
|
||
|
Brass Female Connector 1/4" x 1/8" NPT Material : Unplated Brass Use : To Connect 1/4" OD Aluminium Tube 1/8" NPT ML Thread Includes : Body, 1off Nut, 1off Ferrule Set |
|
|
|
|
Brass Back and Front Ferrule 1/4" (Pack 10 Set) Material : Unplated Brass Use : Replacement Ferrule Set for All " Tube Fittings Includes : Back and Front Ferrule Only |
|
||
|
Valve Nozzle Core Material : Plated Brass Body c/w Teflon Seat and Seal Use : Replacement Valve for Nozzle #730025 Includes : 1 off Valve Only |
|
||
|
Nozzle Block Mounting Bracket Material : 2mm Aluminium Use : Suitable for Mounting of Nozzle Block #730026 Includes : 1 off Bracket Only |
|
||
|
Bactigas Heater Regulator c/w Blower |
|
|
|
|
Spigot to Cylinder Nylon Washer RG134 Material : Nylon Use : InsectiGas and PestiGas Spigot Seal Size : 11.1 ID x 18.3 OD x 1.5 Thick Includes : 1 off Washer Only |
|
|
|
|
S'Steel Male Connector 1/4" x 1/8" NPT Material : 316 Stainless Steel Use : To Connect 1/4" OD Aluminium Tube 1/4" NPT FM Thread Includes : Body, 1off Nut, 1off Ferrule Set |
|
||
|
Spigot Filter RB38 Material : Copper- |
|
||
|
Filter Retaining Screw RB39 Material : Unplated Brass Use : To Secure Spigot Filters #736890 |
|
|
|
|
Brass Male Connector 1/4" Tube x 1/8" NPT Material : Unplated Brass Use : To Connect 1/4" OD Aluminium Tube 1/8" NPT FM Thread Includes : Body, 1off Nut, 1off Ferrule Set |
|
||
|
Brass Reducing Hex Nipple 1/4 x 1/8 BSPT Material : Unplated Brass Use : General Purpose Reducing Nipple Weight : 19g |
|
||
|
Light Series 1/4" Pipe Clamp Single Hole (Pack of 40) Material : PolyPropylene Use : To Support " OD Tube Includes : Pack of 40 |
|
||
|
Co2 Cylinder Nut - Material : Brass Unplated Use : Connect To CO2 Cylinder Outlet Thread Includes : Cylinder Nut Only |
|
||
|
Space controller MKIII 12 Volt Actuator/Valve 1/4" |
|
|
|
|
737049 |
Wall Mounted Manifold Assembly |
|
|
|
Control Box For Space control Module MKIII Not manufactured any more |
|
|
|
|
Brass Needle Valve 1/4" NPT Male, Kel- Material : Brass Body, Kel- Use : Used On Spacecontroller Manifold Block To Pressurise and De- Ports : 1/4" Nale NPT |
|
|
|
|
Hex Manifold Wall Mounting Bracket Material : Mild Steel, Red Powdered Coated Use : Wall Mounting The Hex Manifold Block #736459 |
|
||
|
Dose Gun Male Quick Connector Material : Brass Unplated Use : Connect Dose Gun To Fill Connector |
|
|
|
|
Double "O" Ring Captive Nut for Envirosol Hand Gun Material : Brass Unplated Use : Envirosol Gun Rear Double- |
|
||
|
1/4" BSPT Brass Plug Material : Unplated Brass Use : Blocks Off Spare Ports On The Hex Manifold #736459 |
|
||
|
Spring Retaining Bush 3/4" x 1/4" Material : Unplated Brass Use : Connects Needle Valve #737078 To The Hex Manifold #736459, It Also Supports The Spring #736461, & Filter Element #736460 Inside The Hex Manifold |
|
||
|
Envirisol Gun Front Seal Material : Unplated Brass & Teflon Use : Replacement Front Seal For Envirosol Hand Gun #736679 |
|
||
|
Space controller MKIII 12 Volt Actuator/Valve 3/8" |
|
||
|
Brass Male Connector 1/4" BSPP/60 x 1/4" OD Tube Material : Unplated Brass Use : This Single Fitting will Connect 1/4" OD Aluminium Tube #730034 & #730036 Directly to Hoses Includes : Body, 1off Nut, 1off Ferrule Set |
|
p10 |
|
|
Brass Double Seated Union 1/4" BSP/60 x 1/4" BSP/60 Material : Brass Use : Connects Two Envirosol Hoses Together Includes : Brass Fitting Only Specification : 1/4" BSPP/60° Internal Cone Both Ends |
|
||
|
Brass Female Connector 1/4" x 1/4" NPT Material : Unplated Brass Use : To Connect 1/4" OD Aluminium Tube 1/4" NPT ML Thread Includes : Body, 1off Nut, 1off Ferrule Set |
|
p11 |
|
|
Strobe Lamp Blue, 12/24VDC, IP65 Material : Blue Polycarbonate Lens Use : To Indicate When Spacecontroller is Operating Includes : Terminal Block & Mounting Base Specification : 12/24VDC x 2W, IP65, - |
|
||
|
Double Pipe Clamp, LNG Series, 2 x 1/4" Pipes Material : PolyPropylene Use : To Support 2off x " OD Tube Includes : Pack of 20 |
|
||
|
Brass Bulkhead Female Connector 1/4Tube x 1/4"NPT Material : Unplated Brass Use : To Connect 1/4" OD Aluminium Tube 1/4" NPT ML Thread Can Be Anchored Off A Mounting Bracket Includes : Body, 1off Nut, 1off Ferrule Set, Locknut |
|
||
|
Brass Male Branch Tee 1/4" x 1/4"NPT Material : Unplated Brass Use : To Connect 2off x 1/4" OD Aluminium Tube and I/4NPT Female Fitting Includes : Body, 2off Nuts, 2off Ferrule Sets |
|
||
|
"40" Series 3 Way Brass Ball Valve 1/4" (Low Temperature) Material : Unplated Brass Use : 3- Includes : Body, 3off Nuts & Ferrule Sets, Handle & Locknut |
|
||
|
Multisize Dose Cylinder Adapter Material : 38mm A/F Hex Brass Use : For Mounting two sizes of Dose Cylinders on Manual Spacecontroller 736640 |
|
||
|
Brass Union Cross (4 Way) 1/4" Tube Material : Brass Spec : 1/4" Tube Size, Includes Nuts and Ferrules |
|
p12 |
|
|
New "E" Size Dose Cylinder Steel 23.8L Water Capacity = 11.9Kg Envirosol Dose capacity See Dose Cylinders for more information |
|
||
|
New "F" Size Dose Cylinder Steel 34.3L Water Capacity = 17.2Kg Envirosol Dose capacity See Dose Cylinders for more information |
|||
|
New "D" Size Dose Cylinder Aluminium 10L Water Capacity = 5Kg Envirosol Dose capacity See Dose Cylinders for more information |
|||
|
Stainless Steel Sample Cylinder 500mL 500mL Water Capacity = 250g Envirosol Dose capacity See Dose Cylinders for more information |
|
||
|
Brass Tube Nut 1/4" Material : Brass Unplated Use : Replacement Nut, Suits all Twin Ferrule 1/4" Tube Fittings |
|
||
|
Brass Union Elbow 1/4" Tube Material : Brass Unplated Use : Connects Two 1/4" Tubes Together at Right Angles |
|
||
|
CO2 Nut Spigot & Washer - Material : Non Plated Brass Use : Connects Hose#730006 or #736588 to a CO2 Cylinder Includes : Nut #737014, Spigot #730002 & Washer #736867 Only |
|
p13 |
|
|
Brass Union Tee 3/8" Material : Unplated Brass Use : To Connect 3/8" OD Aluminium Tube Includes : Body, 3off Nuts, 3off Ferrule Sets |
|
||
|
Brass Male Connector 3/8" Tube x 1/4" NPT Material : Unplated Brass Use : To Connect 3/8" OD Aluminium Tube 1/4" NPT FM Thread Includes : Body, 1off Nut, 1off Ferrule Set |
|
||
|
Brass Tube Reducer 3/8" Tube to 1/4" Stub Material : Plain Brass Use: Connects 3/8" Tube to 1/4" Fitting or Port |
|
||
|
Brass Tube Reduced 1/4" Tube to 3/8" Stub Material : Plain Brass Use : Connects 1/4" Tube to 3/8" Fitting or Port |
|||
|
New "B" Size Dose Cylinder - Material : Aluminium Water Capacity : 1.8L Dose Capacity : 0.9kg |
|
||
|
Capillary Nozzle 1/8" Material : Brass Use : Flexible Nozzle for use with Pestigas Fixed Systems Spec : 1/8" BSP 0.020" x 120mm Long, 2.0g/s |
|
||
|
4- Materials : Brass & SS Include Parts : 730025 (x4), 730026, 736725, 737287 |
|
p14 |
|
|
Brass Bulkhead Union 1/4" Tube Materials : Brass Use : Connects 2 x 1/4" Tubes Through a Panel Wall |
|
||
|
Capillary Nozzle 1/4" Swagelok Material : Brass Use : Flexible Nozzle for use with Pestigas Fixed Systems Spec : 1/4" SwageLok, 0.020" x 120mm Long, 2.0g/s |
|
||
|
Brass Union Elbow 3/8" Tube Material : Brass Unplated Use : Connects Two 3/8" Tubes Together at Right Angles |
|
||
|
Brass Bulkhead Union 3/8" Tube Materials : Brass Use : Connects 2 x 3/8" Tubes Through a Panel Wall |
|
||
|
S'Steel Bulkhead Retainer - Materials : SS Use : Secures Bulkhead Fittings From Turning and Loosening |
|
||
|
Solenoid Valve 24VDC x 3/64" Orifice Material : Nickle Plated Brass Body Ports : 1/8” BSPT Female Protection Rating : IP65 Weatherproof Housing Power Rating : 24VDC 9W |
|
||
|
Grasslin Digital Weekly Time Clock Spec : 1 changeover contact, 70 memory locations 2- Switching capacity 16A/250VAC |
|
||
|
Brass Union Cross (4 Way) 3/8" Tube Material : Brass Spec : 3/8" Tube Size, Includes Nuts and Ferrules |
|
||
|
Space Control Module MK4, 3/8" S/S Size : 3/8" S/S 3- Didital Weekly Time Clock, Strobe Lamp, Siren Hex Manifold Block, Inlet and Outlet 3/8" Tube Fittings S/S Enclosure and Wall Mounting Brackets Does NOT Include Hoses, Dose Cylinder or Spray Nozzles |
|
||
|
RipeGas Capillary Tube T20 Nut & Spigot Material : Brass & SS Spec : Fits T20 (ripegas) Cylinder, SS Capillary 0.010 x 300 Lg Flow Rate : 0.4g/s Ripegas |
|
||
p2
©2023 GasApps Australia P/L. All rights reserved